Di Contatto |

buy Hydraulic Pump CBQZ Series Automobile Tail Plate Special Gear Pump CBQZ-0.8F CBQZ-1.2F CBQZ-1.6F CBQZ-2.0F CBQZ-2.5F Gear Pump_Excavator Hydraulics, Motore diesel, SKS idraulico

Pompa idraulica/

buy Hydraulic Pump CBQZ Series Automobile Tail Plate Special Gear Pump CBQZ-0.8F CBQZ-1.2F CBQZ-1.6F CBQZ-2.0F CBQZ-2.5F Gear Pump_Excavator Hydraulics, Motore diesel, SKS idraulico

buy Hydraulic Pump CBQZ Series Automobile Tail Plate Special Gear Pump CBQZ-0.8F CBQZ-1.2F CBQZ-1.6F CBQZ-2.0F CBQZ-2.5F Gear Pump

  • Dettagli del prodotto

buy Hydraulic Pump CBQZ Series Automobile Tail Plate Special Gear Pump CBQZ-0.8F CBQZ-1.2F CBQZ-1.6F CBQZ-2.0F CBQZ-2.5F Gear Pump

Spostamento: 2.5 ml/r (milliliters per revolution). This indicates the volume of fluid that the pump displaces with each rotation of the gears.

Pressione nominale: 20 MPA (megapascals). This is the pressure at which the pump is designed to operate continuously under normal conditions.

Maximum Pressure: Generalmente, it can reach around 25 MPA. This is the highest pressure that the pump can withstand for short periods without causing damage.

Gamma di velocità:

Rated Speed: Typically around 2000 – 2500 RPM (revolutions per minute). This is the speed at which the pump operates most efficiently under rated conditions.

Minimum Speed: Generalmente, it should not be lower than 600 – 800 rpm to ensure proper lubrication and operation of the pump.

Maximum Speed: Generalmente, it is limited to 3000 – 3500 RPM. Operating the pump above this speed may lead to excessive wear, reduced efficiency, and potential damage.

Prev:

Prossimo:

Lasciare una risposta

Lasciate un messaggio