Tonkee Machinery 로고
제조업체: Sauer Danfoss
Series: 90 Series
유형: Circuit Axial Piston Pumps
Performance Specifications
Displacement:
The pumps in the 90 Series offer a range of displacements. Typically, the displacement can vary from [minimum displacement value] cubic inches per revolution (in³/rev) to [maximum displacement value] in³/rev. For example, it might range from 0.8 in³/rev to 5 in³/rev, depending on the specific model within the series.
Pressure Ratings:
Maximum Operating Pressure: These pumps are designed to handle a maximum operating pressure of up to [X] pounds per square inch (psi). The value of [X] can vary, but common maximum pressures for this series could be around 4000 psi or higher, depending on the configuration and application requirements.
Peak Pressure: They can withstand short-duration peak pressures of up to [Y] psi, which is usually higher than the maximum operating pressure to account for transient conditions in the hydraulic system.
Flow Rates:
Nominal Flow Rate: At a given rotational speed (usually specified, such as [Z] revolutions per minute (rpm)), the pump can deliver a nominal flow rate of [flow rate value] gallons per minute (gpm). For instance, at 1800 rpm, it might deliver a flow rate of 20 gpm.
Variable Flow Capability: The 90 Series pumps often have the ability to vary the flow rate based on the system's demand. The flow rate can be adjusted within a certain range, typically from [minimum adjustable flow rate] gpm to [maximum adjustable flow rate] gpm.
