Логотип Машины Тонки
Model: A10V071-15T
Application: Specifically designed for use in excavators to provide the essential hydraulic power required for various operations such as digging, lifting, swinging, and other movements of the excavator's components like the boom, arm, and bucket.
Performance Characteristics
Смещение: The displacement volume of this pump typically ranges from [X] to [Y] cubic centimeters per revolution (cm³/rev), with the standard displacement for the A10V071-15T model being approximately [Z] cm³/rev. This displacement value determines the amount of hydraulic fluid pumped per revolution and has a significant impact on the flow rate and power output of the pump.
Рейтинг давления: Rated to operate at a pressure of [P] bar under normal working conditions. This ensures stable and efficient performance of the hydraulic system within the excavator during routine operations.
Максимальное давление: Can withstand a peak pressure of up to [Q] bar during short-duration, high-load situations such as when encountering particularly hard ground or obstacles during digging operations. However, continuous operation near or at the maximum pressure may necessitate additional cooling or other precautions to safeguard the pump from potential damage.
Rated Speed: The pump is designed to run at a rated speed of around [R] revolutions per minute (rpm). Operating at this speed enables a consistent flow rate of hydraulic fluid to meet the demands of the excavator's hydraulic actuators for smooth operation.
Maximum Speed: It can reach a maximum speed of [С] rpm under certain conditions, although continuous operation at this speed might require extra cooling and other considerations to maintain the integrity of the pump and ensure its proper functioning.
