oem CDFC,CB-FC,2CB-FC Series of CB-FC10,CB-FC16,CB-FC20,CB-FC25,CB-FC32,CB-FC40,CB-FC50 Hydraulic Gear Pump

CB-FC50 Hydraulic Gear Pump

When the pump shaft is connected to the motor, an elastic coupling should be used, and the concentricity should be within 0.1mm. There should be no excessive tightness or uneven weight when rotating the coupling by hand. When the pump shaft is connected to the hole, the fit clearance between the pump shaft and the hole should be between 0.02mm and 0.03mm. Forced tapping is not allowed to avoid jamming of the pump shaft.