شعار آلات تونكي
There is no official exact flow rate value available. لكن, عادة, for a water pump used in an engine cooling system like this, the flow rate is estimated to be in the range of 30 – 120 متر مكعب في الساعة. This range is crucial to ensure sufficient coolant circulation to meet the engine's cooling requirements. The actual flow rate may vary depending on factors such as the pump's rotational speed and the characteristics of the cooling system.
ضغط الرأس
على العموم, the head pressure for this type of engine – cooling water pump is expected to be in the range of 8 – 40 متر. The working pressure usually does not exceed 1.0 الآلام والكروب الذهنية. It's assumed that this water pump's head pressure falls within this typical range. Adequate head pressure is necessary to overcome the resistance in the cooling system and ensure effective coolant distribution.
الأبعاد المادية
الأبعاد الشاملة
طول: Exact length dimensions are not provided. عادة, the length of such water pumps for similar engines can range from 200 – 400 مم. The length is an important factor for installation as it determines the space the pump occupies in the engine compartment.
عرض: The width measurement is also not specified. عادة, the width of these pumps is around 100 – 200 مم. The width affects the fit of the pump and the clearance it requires among other engine components.
ارتفاع: There is no precise height value given. عادة, the height of this kind of water pump is approximately 150 – 300 مم. The height is significant for proper installation and to avoid interference with other parts.
