حساس ضغط الزيت للحفارات موديلات 320b 320c

س1: What are the core OEM/aftermarket models and applicable scope of the oil pressure sensor for 320B/320C excavators?

نماذج المنتجات الأساسية

• OEM-specific models:
  • 5I-8005: The primary factory-matched sensor for 320B and 320C, also compatible with 312BL/312C excavators, designed for direct replacement of worn or faulty original sensors;
  • 213-0677 (2130677): A high-performance OEM variant for 320B/320C with enhanced signal stability, matching the engine’s electronic control system (إدارة المحتوى في المؤسسة) of these models;
  • 221-8859 (221-8859HE02): A pump-integrated oil pressure sensor for 320B/320C (and 320D), focusing on hydraulic system oil pressure monitoring while being compatible with engine oil pressure detection.
• Aftermarket universal models: Third-party replacements (على سبيل المثال, Sinocmp 5I-8005) that meet or exceed OEM performance standards, suitable for cost-effective maintenance of non-original equipment fleets.

النطاق القابل للتطبيق

• 320B excavator: Monitors the engine’s main oil gallery pressure (0–1MPa range) during medium-load operations like urban foundation excavation and road construction, preventing engine wear from insufficient lubrication;
• 320C excavator: Tracks both engine oil pressure and auxiliary hydraulic system oil pressure (0–1.2MPa) for heavy-load scenarios such as quarrying and large-scale earthmoving, ensuring dual-system lubrication and pressure stability;
• Core usage scenarios: استبدال الخطأ (على سبيل المثال, انجراف الإشارة, circuit short, عدم دقة قياس الضغط) and routine engine/hydraulic system maintenance, aligning with Caterpillar’s original equipment maintenance specifications.

Q2: What is the working principle and core functions of the oil pressure sensor for 320B/320C?

مبدأ العمل

• Pressure-to-electrical signal conversion: The sensor uses the piezoresistive effect—oil pressure acts directly on the internal silicon membrane, causing micro-deformation that changes the resistance of the integrated Wheatstone bridge circuit. The electronic module amplifies this resistance change into a linear voltage signal (0.5–4.5VDC for 5I-8005);
• ECM feedback & alarm triggering: The voltage signal is transmitted to the excavator’s ECM. When the detected pressure is below the threshold (≤0.15MPa at idle for 320C), the ECM activates the dashboard low-oil-pressure warning light and stores diagnostic trouble codes (DTCs) for subsequent troubleshooting;
• Dual-system monitoring (ل 221-8859): For 320C, it simultaneously collects engine oil pressure and hydraulic pump oil pressure, sending separate signals to the engine ECM and hydraulic control unit to ensure coordinated operation of both systems.

الوظائف الأساسية

• Real-time oil pressure monitoring: Provides continuous data on 320B/320C’s engine oil pressure (0.15MPa at idle, 0.6MPa at rated speed for 320C) , ensuring adequate lubrication of crankshaft bearings, cylinder liners, والمكابس;
• Fault early warning: Triggers alerts for abnormal pressure (على سبيل المثال, low pressure from oil leakage or pump failure, high pressure from oil channel blockage) to avoid catastrophic engine damage;
• ECM closed-loop control: Transmits pressure data to the ECM, which adjusts the engine’s idle speed and fuel injection volume based on oil pressure status (على سبيل المثال, reducing load if pressure drops to protect the engine);
• Dual-signal compatibility (320ج): Supports both analog voltage signals (for traditional gauges) and digital CAN bus signals (for the 320C’s advanced ECM), enabling integrated vehicle diagnostic system (IVDS) data sharing.

س3: What are the key technical parameters of the oil pressure sensor for 320B/320C?