Logotipo de Machinery Tonkee
Available in different displacement sizes, normalmente van desde [specific minimum value] a [specific maximum value] cm³/rev. The displacement determines the volume of hydraulic fluid pumped per revolution of the drive shaft, which is a key factor in meeting the flow requirements of the hydraulic system.
Clasificaciones de presión
Presión nominal: Generalmente alrededor [valor de presión nominal] bar. This is the pressure at which the pump is designed to operate continuously under normal working conditions to provide the required flow and power.
Máxima presión: Puede alcanzar hasta [valor máximo de presión] bar por periodos cortos. This allows the pump to handle peak loads and sudden pressure surges in the hydraulic system without immediate failure.
Velocidad
Velocidad nominal: The recommended operating speed is [valor de velocidad nominal] rpm. Operating the pump at or near the rated speed ensures optimal performance in terms of flow rate, generación de presión, y eficiencia mecánica.
Velocidad máxima: The pump can tolerate a maximum speed of [valor de velocidad máxima] rpm, but continuous operation at this high speed may reduce the pump's service life and increase wear.
Tasa de flujo
The flow rate of the A10VNO pump depends on its displacement and operating speed. A la velocidad y desplazamiento nominales, El caudal puede variar desde [minimum flow value] a [valor de flujo máximo] L/min. This flow rate is sufficient to power a variety of hydraulic actuators and components in different applications.
