Logotipo de Machinery Tonkee
104-6485-005 Motor hidráulico
| Desplazamiento teórico | ~250 cm³/rev (centímetros cúbicos por revolución) | Displacement = volume of oil required to rotate the motor 1 full turn; higher displacement = higher torque at lower speed. |
| Presión continua máxima | 28 MPA (4060 psi) | Presión de operación segura a largo plazo (inlet pressure); exceeding this causes seal damage and internal wear. |
| Maximum Back Pressure | 3 MPA (435 psi) | Maximum allowable pressure at the motor’s oil return port; use a relief valve if back pressure exceeds this value. |
| Velocidad nominal | 50 – 500 rpm | Optimal speed range for high torque output (≥90% of rated torque) y bajo ruido; unsuitable for high-speed applications (P.EJ., >600 rpm). |
| Torque máximo (Continuo) | ~10.500 N·m (7,740 lbf·ft) | Par = (Displacement × Pressure × Efficiency) ÷ (2au); this motor delivers high torque for heavy-load scenarios (P.EJ., lifting excavator buckets). |
