Logotipo de Machinery Tonkee
Nombre de la serie: Parker PD Series
Tipo: Bomba hidráulica
2. Especificaciones de rendimiento
Desplazamiento
The PD series hydraulic pumps have a defined range of displacements. The displacement typically varies from [valor mínimo de desplazamiento] a [valor máximo de desplazamiento] . This range allows for different flow output capabilities to suit various hydraulic system requirements.
Tasa de flujo
Caudal máximo: At a specific rotational speed and under optimal conditions, La bomba puede alcanzar un caudal máximo de hasta [incógnita] litros/minuto. This maximum flow rate is crucial for applications where a high volume of hydraulic fluid needs to be transferred quickly.
Regulación de flujo: Some models of the PD series may have features for flow rate regulation. This can be either through mechanical means or with the use of additional control devices to adjust the output flow according to the specific needs of the hydraulic system.
Clasificaciones de presión
Presión máxima de funcionamiento: The pumps are rated for a maximum operating pressure of [valor de presión de funcionamiento] bar. tan alto – pressure rating enables the PD series pumps to be used in systems that require significant hydraulic pressure to operate effectively.
Capacidad de presión máxima: In addition to the maximum operating pressure, the pumps have a peak pressure capacity of up to [valor de presión máxima] bar. This provides a safety margin to handle short – term pressure surges during system startup, shutdown, or sudden load changes.
3. Velocidad de rotación
Velocidad continua máxima: The PD series hydraulic pumps can operate continuously at a maximum speed of up to [valor de velocidad máxima] rpm (revoluciones por minuto). Alto – speed operation allows for efficient fluid transfer and can be beneficial in applications that require rapid response times.
Velocidad mínima recomendada: There is a minimum recommended speed of [valor mínimo de velocidad] rpm. Operating the pump below this speed for extended periods can lead to reduced efficiency, insufficient fluid flow, y posibles daños a los componentes internos de la bomba..
