Tonkee Machinery Logo
Q1: What is the product identification and applicable scope of the 7834-40-2000 throttle motor?
A1: The 7834-40-2000 throttle motor is a high-efficiency, OEM-compatible electromechanical control component exclusively engineered for Komatsu PC200-6 (20-ton class) mid-duty excavators, paired with the Komatsu SAA6D95L inline 6-cylinder diesel engine (rated power: 110kW @ 2000rpm).
Core Product Information
- Part Number: 7834-40-2000 (alternate: 7834402000), categorized as a governor throttle motor/accelerator actuator with an integrated precision position sensor.
- Aftermarket Advantage: Manufactured to exceed Komatsu OEM standards, featuring enhanced efficiency and durability for long-hour construction operations.
Applicable Scope
The motor serves as the core engine speed control component for PC200-6, deployed in medium-load scenarios including:
- Municipal engineering, medium-scale earthmoving, and infrastructure construction;
- Continuous operation such as foundation digging, road building, and material loading.
It is designed for fault replacement (e.g., motor jamming, position sensor failure, speed regulation inaccuracy) and routine maintenance, ensuring precise throttle control to optimize the PC200-6’s fuel efficiency and power output.
Q2: What is the working principle and core functions of the 7834-40-2000 throttle motor?
A2: As the “engine speed regulator” for Komatsu PC200-6, the 7834-40-2000 motor realizes dynamic, closed-loop throttle control through coordination with the excavator’s ECM (Engine Control Module), delivering efficient and stable speed management:
Working Principle
- When the operator adjusts the in-cab throttle lever, the ECM sends a 24V DC control signal to the motor.
- The motor drives a precision gear set to adjust the engine throttle opening, while the integrated position sensor feeds real-time position data (analog signal) back to the ECM.
- The ECM fine-tunes the signal to maintain the target speed (idle: 650rpm ~ rated: 2000rpm), completing a control cycle in ≤0.8s for responsive operation.
Core Functions
- Precision Speed Regulation: Linear throttle adjustment with ±5rpm control accuracy, ensuring consistent engine performance across light-to-medium load changes (e.g., smooth switching between digging and idling).
- Load-Adaptive Efficiency: Automatically compensates for speed fluctuations caused by varying workloads (e.g., digging hard soil), preventing stalling and optimizing fuel consumption (saving up to 5% compared to generic motors).
- Real-Time Position Feedback: The built-in position sensor (0.1° resolution) enables the ECM to monitor motor status, triggering Diagnostic Trouble Codes (DTCs) for anomalies (e.g., sensor signal loss) to simplify troubleshooting.
- Emergency Protection: Automatically resets to idle position if power is interrupted or faults occur, preventing engine overspeeding and protecting the SAA6D95L engine and hydraulic system.
- Low-Power Operation: Standby power consumption ≤0.3W, reducing battery drain during long-term equipment standby.
Q3: What are the key technical parameters of the 7834-40-2000 throttle motor?
A3: All parameters are calibrated to Komatsu PC200-6’s SAA6D95L engine and electrical system requirements, ensuring seamless integration and efficient performance:
| Parameter | Specification |
|---|---|
| Operating Voltage | DC 24V (20–28V wide range) |
| Rated Current | 1.2–1.5A |
| Output Torque | ≥1.8N·m (sufficient to drive PC200-6’s throttle linkage) |
| Speed Regulation Range | 650–2000rpm (matches SAA6D95L engine specs) |
| Response Time | ≤0.8s (full-stroke adjustment from idle to rated speed) |
| Position Sensing Accuracy | ±0.1° |
| Protection Rating | IP65 (dust/water-splash proof for engine bay) |
| Operating Temperature Range | -40℃ ~ +85℃ |
| Vibration Resistance | ≤18g (10–2000Hz, adapting to construction site vibration) |
| Power Consumption | ≤25W (rated load); ≤0.3W (standby) |
| Mounting Interface | Bolt-on flange (exact match to PC200-6’s OEM mounting holes) |
| Electrical Connector | 4-pin waterproof socket (Komatsu standard) |
| Service Life | ≥8,000 operating hours (medium-load continuous use) |
