Sobre Contato |

Venda quente Bomba de pistão hidráulica V38D12RAX-95 Controle de pressão duplo China Fabricante Bomba de pistão de óleo hidráulico V38D - Tonkee Machinery

Bomba hidráulica/

Venda quente Bomba de pistão hidráulica V38D12RAX-95 Controle de pressão duplo China Fabricante Bomba de pistão de óleo hidráulico V38D

V38D12RAX-95 Hydraulic Oil Piston Pump

Maintain the reservoir oil level at 70–80% capacity (never below the minimum mark). Replace the suction filter every 500 operating hours (use 10 μm or finer filters). Keep suction line length ≤1.2 meters and diameter ≥20 mm (avoid sharp bends that restrict flow). Ensure the pump runs above 600 rpm during operation (use a speed sensor to monitor).

  • Detalhes do produto

V38D12RAX-95 Hydraulic Oil Piston Pump

Theoretical Displacement ~38 cm³/rev Determines maximum flow output (flow = displacement × speed × volumetric efficiency).
Maximum Continuous Pressure 28 MPA (4060 psi) Safe long-term operating pressure; exceeding this causes premature wear of pistons, valve plates, or seals.
Pressão de Pico 35 MPA (5075 psi) Short-duration pressure (≤5 segundos) for emergency heavy loads (por exemplo, sudden machine jolts); avoid prolonged use.
Rated Speed 1000 2500 RPM Optimal speed range for high volumetric efficiency (≥91%) and low noise (≤76 dB(A) at 1m distance).
Minimum Speed ≥600 rpm Prevents cavitation (air bubble formation in oil); running below 600 rpm reduces suction efficiency and causes flow instability.
Hydraulic Fluid Compatibility ISOS VG 32/46/68 mineral-based hydraulic oil Must meet cleanliness standard NAS 8 or higher (use 10 μm filtration to avoid contamination of precision internal components).
Operating Temperature Range -15° C a +80 ° C. (5°F a +176°F) Extreme temperatures (below -15°C or above 80°C) thicken/thin oil, reducing pump efficiency and damaging seals.

Anterior:

Próximo:

Deixe uma resposta

Deixe um recado