Tonkee Machinery Logo
Bewertungsdruck: This is the pressure at which the pump is designed to operate continuously. For Denison vane pumps used in injection molding and die – casting machines, the rated pressure could be in the range of several hundred to over a thousand pounds per square inch (Psi) or megapascals (MPA). Zum Beispiel, it could be around 20 – 30 MPA (2900 – 4350 Psi).
Maximaler Druck: The pump can withstand a higher pressure for short – term operations. The maximum pressure value is typically higher than the rated pressure and is specified in the product manual to ensure safe operation under extreme conditions.
3. Speed Range
Minimum Speed: There is a minimum rotational speed below which the pump may not function properly. This could be due to issues such as insufficient lubrication or cavitation. The minimum speed might be around 600 – 1000 Revolutionen pro Minute (Drehzahl).
Höchstgeschwindigkeit: Exceeding the maximum speed can cause excessive wear, noise, and potential damage to the pump. The maximum speed could be in the range of 2000 – 3000 Drehzahl, depending on the specific design and application requirements.
