โลโก้เครื่องจักร Tonkee
ประเภทเครื่องยนต์: 4 – cylinder diesel engine with electronic injection
การกำหนดรุ่น: C4.4
การกำหนดค่า: ใน – เส้น 4 – การกำหนดค่ากระบอกสูบ, which provides a good balance of power output and smooth operation.
ข้อมูลจำเพาะด้านประสิทธิภาพ
กำลังขับ
The power output can vary depending on the specific tuning and application of the engine. It typically ranges from a certain minimum to a maximum value. ตัวอย่างเช่น, it might have a power output ranging from [เอ็กซ์] กิโลวัตต์ถึง [ย] kW to meet different power requirements in various machinery.
รอบต่อนาที (รอบต่อนาที)
The engine usually has an operating speed range. The rated speed might be around [ซี] รอบต่อนาที, which is designed to optimize power delivery and fuel efficiency. The maximum allowable speed could be slightly higher to handle short – term overloads or specific operating conditions.
ข้อมูลจำเพาะของระบบเชื้อเพลิง
Fuel Injection Type: Electronic injection system. This system precisely controls the amount and timing of fuel injection into each cylinder. It allows for better fuel atomization, ปรับปรุงประสิทธิภาพการเผาไหม้และลดการปล่อยมลพิษ.
ประเภทเชื้อเพลิง: Diesel fuel. It is designed to operate with standard – grade diesel fuel with appropriate cetane number and viscosity. The fuel system may have a fuel filter to ensure clean fuel supply to the injectors.
Injector Specifications
The injectors are a crucial part of the fuel system. They have a specific injection pressure, which could be in the range of [ป1] บาร์เพื่อ [ป2] บาร์. The injection quantity per cycle can be adjusted according to the engine's load and speed requirements. The injectors are also designed to have a long service life and reliable performance.
Mechanical Components Specifications
Piston and Liner Kit
การออกแบบลูกสูบ: The pistons are typically made of high – วัสดุโลหะผสมที่มีความแข็งแรง. They have a specific diameter, มักจะอยู่ในช่วงของ [D1] มม. ถึง [D2] มม, depending on the engine's cylinder bore size. The piston crown design may vary depending on the combustion chamber shape and fuel injection pattern.
Liner Material and Thickness: The cylinder liners are made of wear – resistant materials such as cast iron or a composite material. The liner thickness can range from [T1] มม. ถึง [ที2] mm to provide sufficient strength and heat dissipation. The piston – ถึง – liner clearance is carefully designed to ensure proper operation and minimize wear.
Turbocharger Specifications
พิมพ์: The turbocharger used in this engine helps to increase the air intake and boost the engine's power output. It could be a variable – geometry turbocharger (VGT) or a fixed – geometry turbocharger. The VGT allows for better control of boost pressure across a wide range of engine speeds and loads.
เพิ่มแรงดัน: The turbocharger can provide a boost pressure ranging from [B1] บาร์เพื่อ [บี2] บาร์. This increase in air pressure in the intake manifold improves the engine's volumetric efficiency and power output.
